AirCraftMaterialsUK.com
 

 

E-mail sales@aircraftmaterialsuk.com

Tel: + 44(0)1844 275560  Fax: 44(0)1844 346892 

HOME

USA Telephone Contact Number +1 714 735 4413

Office Open 8am to 6pm GMT

AirCraftMaterialsUK.com

    

Aluminium Alloys | Alloy and ST / Steel | Copper Alloys | Electronic Alloys  | Magnesium | Nickel Alloys | Plastic | Titanium Alloys 

Quality - BS EN 9120:2005, / ISO 9001:2008

Request for Quotation

 

Data Sheet:

Corrosion Resisting Alloy AMS 5516

Typical Chemical Composition

Weight %

C

Si

Mn

P and S max

Cr

Ni

N

AMS 5516 

302

0.15

0.75

2.0

0.045 P + 0.030 S

17.00 / 19.00

8.0 / 10.0

0.10

 

AVAILABILITY

Type 302 is available in Sheet, Strip, Plate, Angles, Bars (Round, Hexagon, Squares, Flats).  

302 Foil (Shim) is available in various thicknesses.  View stock list for further information.  Foil Stock List, Sheet/Plate Stock List.

 

SPECIFICATIONS

Type 302 Stainless Steel is covered by the following specifications:

 

AMS 5516 Sheet, Strip and Plate: MIL-S-5059

 

Similar Specifications

AMS 5515 Sheet, Strip and Plate: MIL-S-5059

AMS 5500 Laminated Sheet and Surface Bonded: MIL-S-22499

AMS 5600 Sheet Laminated and Edge Bonded

AMS 5636 and 5637 Bars and Wire

ASTM A 240 and ASME SA-240

BS970 : Grade 310

Werkstoff Nr. 1.4841

UNS : S30302

 

RESISTANCE TO OXIDATION and CORROSION Alloy 302 (also know as 18-8) is an austenitic stainless steel it provides useful resistance to corrosion on a wide range of moderately oxidising to moderately reducing environments. Alloy 302 is used widely in equipment and utensils for processing and handling of food, beverages and dairy products. Heat exchangers, piping, tanks and other process equipment in contact with fresh water also utilise these alloys. Building facades and other architectural and structural applications exposed to non-marine atmospheres also heavily utilise the 18-8 alloys. In addition, a large variety of applications involve household and industrial chemicals.

 

TYPICAL MECHANICAL PROPERTIES

Minimum Mechanical Properties Required Property by ASTM A 240, and ASME SA-240

0.2% Offset

Yield Strength,

Ultimate Tensile

Strength,

Percent Elongation in 

2 in. or 50.8 mm

Hardness, Max:

Psi:  

 30,000 Psi:   75,000 40.0 Brinell:    201
MPa:   205

MPa:  

515

RB:  

92

 

Availability Sheet: Ex-Stock

 For all other stock availability contact Sales

Disclaimer

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

 

Sell your Surplus Stock Online at 4metal.co.uk

 

Sales Enquires : sales@aircraftmaterialsuk.com

Site © 2001 AirCraftMaterialsUK.com Ltd,Unit C5, Regent Park, Princes Estate, Princes Risborough, Buckinghamshire, HP27 9LE, UK

Tel: 44(0)1844 275560 Fax: 44(0)1844 346892 

Group companies Quantum Alloys Ltd