|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
AMS5604 Sheet and Strip Cold Rolled
SPECIFICATIONS Type 17-4 PH Stainless Steel is covered by the following specifications: AMS 5604 Sheet, Strip and Plate Similar Specifications AMS 5643 and 5622 Bars, Wire, Forgings, Tubing and Rings ASTM A 693 Plate, Sheet and Strip UNS: S17400
GENERAL PROPERTIES 17-4 PH is a martensitic, precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries.
CORROSION RESISTANCE 17-4 PH Stainless Steel withstands corrosive attack better than any of the standard hardenable stainless steels and is comparable to Type 304 in most media.
FORMABILITY Because this alloy in Condition A is hard, forming normally should be limited to mild operations. However, formability can be greatly improved by heat treating before cold working or by use of hot-forming methods.
MECHANICAL PROPERTIES
Availability: Ex-Stock
Disclaimer Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
E-mail sales@aircraftmaterialsuk.com Site © 2001 AirCraftMaterialsUK.com Ltd Unit 7, Wycombe Industrial Mall, West End Street, High Wycombe, Bucks, HP11 2QY Tel. 44 (0) 1494 857823 Tel. 44 (0) 8707 655 225/6 Fax. 44 (0) 8707 652 267/8 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
