|
Request
for Quotation
|
ALLOY 46
NOMINAL DATA SHEET
|
NOMINAL DATA SHEET
ALLOY 46 TYPICAL
NOMINAL CHEMISTRY |
|
ALLOY 46 TYPICAL
TENSILE STRENGTH |
|
|
| NICKEL (NI) |
46.0 |
ANNEALED |
85,000 MAX. |
| CHROMIUM (CR) |
0.10 |
1/4 HARD |
90,000 to 115,000 |
| MANGANESE (MN) |
0.80 |
1/2 HARD |
105,000 to 125,000 |
| SILICON (SI) |
0.30 |
HARD |
120,000MIN. |
| CARBON (C) |
0.05 |
|
| ALUMINUM (AL) |
0.10 |
TYPICAL HARDNESS,
ROCKWELL B |
| MAGNESIUM (MG) |
0.50 |
ANNEALED |
70 MAX. |
| ZIRCONIUM (ZR) |
0.00 |
1/4 HARD |
78 to 83 |
| TITANIUM (TI) |
0.00 |
1/2 HARD |
84 to 88 |
| PHOSPHORUS (P) |
0.025 |
|
|
| SULFUR (S) |
0.025 |
|
|
| IRON |
BALANCE |
|
|
| |
TYPICAL
LINEAR COEFFICIENT OF THERMAL EXPANSION
(cm. per cm. C x 10 - 6) |
30 to 100 |
8.2 |
| 30 to 200 |
7.9 |
| 30 to 300 |
7.5 |
| 30 to 350 |
7.4 |
| 30 to 400 |
7.5 |
| 30 to 425 |
7.6 |
| 30 to 450 |
7.9 |
| 30 to 500 |
8.6 |
| 30 to 550 |
9.3 |
| 30 to 600 |
9.8 |
| 30 to 700 |
10.7 |
| 30 to 800 |
11.6 |
| 30 to 900 |
12.5 |
| 30 to 1000 |
13.4 |
| |
* PLEASE NOTE THIS IS A NOMINAL DATA SHEET
| Controlled
expansion alloys using compression or eylet brazed seals |
 |
| |
Many other sizes available.
Top of Page
Disclaimer
Every
effort is made to ensure that technical specifications are accurate.
However, technical specifications included herein should be used as a
guideline only. All specifications are subject to change without notice.
|
|
E-mail
sales@aircraftmaterialsuk.com
Site © 2001 AirCraftMaterialsUK.com Ltd
Unit
7, Wycombe Industrial Mall, West End Street, High Wycombe, Bucks, HP11 2QY
Tel.
44 (0) 1494 857823
Tel. 44 (0) 8707 655 225/6 Fax. 44 (0) 8707 652 267/8
|
