AirCraftMaterialsUK.com
 

Division of AirCraftMaterialsUK.com Ltd

E-mail sales@aircraftmaterialsuk.com

Sales Tel: +44 (0) 1844 220040  Fax: +44 (0) 8707 652267

HOME

AirCraftMaterialsUK.com
 

Quality - BS EN 9120:2005, / ISO 9001:2008

Request for Quotation


COPPER ALLOYS 101 / 102 / 110 | AVAILABLE SIZES |

 

CDA 101
COPPER 101 NOMINAL DATA SHEET
CHEMICAL COMPOSITION: 99.99% CU min./.0003 PH
ASTM ALLOY NO.: B152
FEDERAL SPECS.: QQC576
DENSITY(lbs. per cu. in at 68 F (Annealed) (x 27.68 = gms/cu cm at 20 C):.322
MOD. OF ELAST.(x 10****** PSI, tension):17
ELECT. COND.(% IACS at 68 F (20 C) as annealed):101
THERM. COND.
(BTU per sq.ft.per ft.per hr.per F at 68 F,(20 C):226
COEFF.OF TH.EXPN. (Inches/inch/ F x 10(-******) from 68 F to 572 F
(20 C to 300 C):9.8
 

 

COPPER 101 

TENSILE STRENGTH
YIELD STRENGTH(0.2% offset)
(x 1000 PSI (MPA = KSI x 6.8948)
annealed: 26 - 38 8 - 14
1/2 hard: 37 - 46 30 - 44
full hard: 43 - 52 41 - 50
spring: 50 - 58 48 - 57
 

Top of Page

ELONGATION % in 2 inches(= % in 50mm)
annealed: 20 - 50
1/2 hard: 8 - 32
full hard: 3 - 16
spring: 2 - 4
 

 

ROCKWELL B HARDNESS
(.020 gauge and over (Rockwell F or 30 T where noted)
annealed:
1/2 hard: 77 - 89(F)
full hard: 86 - 93(F)
spring: 91 - 97(F)
 

Top of Page

CDA 102

 

NOMINAL DATA SHEET
CHEMICAL COMPOSITION: 99.95 CU min./.015-.040 P
ASTM ALLOY NO.: B152
SAE ALLOY NO.: CA122
FEDERAL SPECS.: QQC576
DENSITY(lbs. per cu. in at 68 F (Annealed) (x 27.68 = gms/cu cm at 20 C):.323
MOD. OF ELAST.(x 10****** PSI, tension):17
ELECT. COND.(% IACS at 68 F (20 C) as annealed):101
THERM. COND.
(BTU per sq.ft.per ft.per hr.per F at 68 F,(20 C):196
COEFF.OF TH.EXPN. (Inches/inch/ F x 10(-******) from 68 F to 572 F
(20 C to 300 C):9.8
 

Top of Page

TENSILE STRENGTH
YIELD STRENGTH(0.2% offset)
(x 1000 PSI (MPA = KSI x 6.8948)
annealed: 26 - 38 8 - 14
1/2 hard: 37 - 46 30 - 44
full hard: 43 - 52 41 - 50
spring: 50 - 58 48 - 57
 

 

ELONGATION % in 2 inches(= % in 50mm)
annealed: 20 - 50
1/2 hard: 8 - 32
full hard: 3 - 16
spring: 2 - 4
 

 

ROCKWELL B HARDNESS
(.020 gauge and over (Rockwell F or 30 T where noted)
annealed:
1/2 hard: 77 - 89(F)
full hard: 86 - 93(F)
spring: 91 - 97(F)
 

Top of Page

CDA 110

 

NOMINAL DATA SHEET
CHEMICAL COMPOSITION: ETP COPPER 99.90 CU min./.05 OXYGEN Max.
ASTM ALLOY NO.: B152
SAE ALLOY NO.: CA110
FEDERAL SPECS.: QQC576
DENSITY(lbs. per cu. in at 68 F (Annealed) (x 27.68 = gms/cu cm at 20 C):.322
MOD. OF ELAST.(x 10****** PSI, tension):17
ELECT. COND.(% IACS at 68 F (20 C) as annealed):101
THERM. COND.
(BTU per sq.ft.per ft.per hr.per F at 68 F,(20 C):226
COEFF.OF TH.EXPN. (Inches/inch/ F x 10(-******) from 68 F to 572 F
(20 C to 300 C):9.8
 

Top of Page

TENSILE STRENGTH
YIELD STRENGTH(0.2% offset)
(x 1000 PSI (MPA = KSI x 6.8948)
annealed: 26 - 38 8 - 14
1/2 hard: 37 - 46 30 - 44
full hard: 43 - 52 41 - 50
spring: 50 - 58 48 - 57
 

 

ELONGATION % in 2 inches(= % in 50mm)
annealed: 20 - 50
1/2 hard: 8 - 32
full hard: 3 - 16
spring: 2 - 4
 

 

ROCKWELL B HARDNESS
(.020 gauge and over(Rockwell F or 30 T where noted)
annealed:
1/2 hard: 77 - 89(F)
full hard: 86 - 93(F)
spring: 91 - 97(F)
 

Top of Page

CDA 101, CDA 102, ETP Copper 110
COPPER ALLOYS 101/102/110

COIL and FOIL

.003
.004
.005
.010
.015
.020
.032
.040
.050
.062

*NOTE: Other sizes available upon request.

Top of Page

Disclaimer    

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Sell your Surplus Stock Online at 4metal.co.uk

 
Aluminium Alloys | Alloy and ST / Steel | Copper Alloys | Electronic Alloys  | Magnesium | Nickel Alloys | Plastic | Titanium Alloys 
 

Sales Enquires : sales@aircraftmaterialsuk.com

Site © 2001 AirCraftMaterialsUK.com Ltd,Unit C5, Regent Park, Princes Estate, Princes Risborough, Buckinghamshire, HP27 9LE, UK

Head office Tel: 44(0)1844 275560 Fax: 44(0)1844 346892 

Sales Tel:  44 (0) 1844 220040 Fax: 44 (0) 8707 652267

Group companies Quantum Alloys Ltd