 |
|
 |
Aluminium Alloys | Alloy and ST / Steel | Copper Alloys | Electronic Alloys | Magnesium | Nickel Alloys | Plastic | Titanium Alloys
|
Part Number WS 1.4005 |
|
Free cutting Chromium stainless steel with 13% Cr |
|||||||
|
Chemical Composition Limits |
|||||||
| Weight % | C | Si | Mn | P | S | Cr | Fe |
| CHRONIFER LABOR 13% | Max 0.15 | Max 1.00 | Max 1.50 | Max 0.06 | 0.15-0.35 | 12.00-14.00 | Rem |
|
Other Chemically similar Specifications |
|||||||
| Weight % | C | Si | Mn | P | S | Cr | Fe |
| WS 1.4005 | Max 0.15 | Max 1.00 | Max 1.50 | Max 0.06 | 0.15-0.35 | 12.00-14.00 | Rem |
| DIN X 12CrS 13 | Max 0.15 | Max 1.00 | Max 1.50 | Max 0.06 | 0.15-0.35 | 12.00-14.00 | Rem |
| AISI 416 | Max 0.15 | Max 1.00 | Max 1.50 | Max 0.06 | 0.15-0.35 | 12.00-14.00 | Rem |
| AFNOR Z11 C13 | Max 0.15 | Max 1.00 | Max 1.50 | Max 0.06 | 0.15-0.35 | 12.00-14.00 | Rem |
|
Chronifer Labor 13% material is Manufactured in Rod, Bar and coil AISI 416 Stainless Steel, WS 1.4005 Resists to water and stream corrosion after tempering and a forced polishing of the parts. For optimum corrosion resistance, surfaces must be free of scale and foreign particles and finished parts should be passivated. Condition T is pre-tempered to 26-32 HRC.
Diameters Ø< 2.00 mm: cold drawn and polished Ø>= 2.00mm: cold drawn, ground and polished. Surface roughness N6-N7
Availability In bars, standard length 3m (2m) and in coil
Tolerances h8 more accurate tolerances on request
Mechanical properties Tensile strength at delivery form 650-850 N/mm 2 After annealing 500-700 N/mm 2
Heat Treatment Hardening in oil 950 to 1000 ºC, content of carbon must be above 0.9% tempering 600-700 ºC
Maximum hardness 43 HRC
Cutting rate 40 to 65 m/mm depending on the lubrication oil, the cutting tool, the shape of parts etc.
Standard Stock most current dimensions from 0.80 to 13m round (English sizes 1/4", 1/8")
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
Sell your Surplus Stock Online at 4metal.co.uk
Sales Enquires : sales@aircraftmaterialsuk.com
Site © 2001 AirCraftMaterialsUK.com Ltd,Unit C5, Regent Park, Princes Estate, Princes Risborough, Buckinghamshire, HP27 9LE, UK
Tel: 44(0)1844 275560 Fax: 44(0)1844 346892
Group companies Quantum Alloys Ltd