 |
|
 |
|
Part Number WS 1.4104 |
|
Chromium Stainless Steel with 17% Cr |
||||||||
|
Chemical Composition Limits |
||||||||
| Weight % | C | Si | Mn | P | S | Cr | Mo | Fe |
|
CHRONIFER LABOR 17% |
0.10-0.17 | max 1.00 | max 1.50 | max 0.06 | 0.15-0.35 | 15.50-17.50 | 0.20-0.30 | Rem |
|
Other Chemically similar Specifications |
||||||||
| Weight % | C | Si | Mn | P | S | Cr | Mo | Fe |
| WS 1.4104 | 0.10-0.17 | max 1.00 | max 1.50 | max 0.06 | 0.15-0.35 | 15.50-17.50 | 0.20-0.30 | Rem |
| DIN X 12 CrMoS 17 | 0.10-0.17 | max 1.00 | max 1.50 | max 0.06 | 0.15-0.35 | 15.50-17.50 | 0.20-0.30 | Rem |
| AISI 430F | 0.10-0.17 | max 1.00 | max 1.50 | max 0.06 | 0.15-0.35 | 15.50-17.50 | 0.20-0.30 | Rem |
| AFNOR Z 13 CF 17 | 0.10-0.17 | max 1.00 | max 1.50 | max 0.06 | 0.15-0.35 | 15.50-17.50 | 0.20-0.30 | Rem |
| EN X 14 CrMoS 17 | 0.10-0.17 | max 1.00 | max 1.50 | max 0.06 | 0.15-0.35 | 15.50-17.50 | 0.20-0.30 | Rem |
|
CHRONIFER LABOR 17% Chromium Stainless Steel with 17% Cr AISI 430F Stainless Steel WS 1.4104 This half ferritic free cutting stainless steel resists to water and steam corrosion and also mild alkalinity media.
Availability Coils: cold drawn +polished; 10-35kg/coil Bars Ø 0-1.99mm: cold drawn and polished Bars Ø 2.00-40mm cold drawn, ground and polished Bar lengths 2m or 3m Surface roughness N5-N6
Standard Tolerances Diameter h7, h8 (4.00, 6.00 and 10.00 in tol h6) Out of roundness/eccentricity: 1/2 of dia tolerance Tolerance in length 30mm
Heat Treatment Soft annealing 800-850 ºC slow furnace cooling (2-4 hours) Hardening: 1000-1050 ºC Max obtainable hardness:40 HRC
Cutting rate 50-60m/min (approximate value, depending on the lubrication oil, the cutting tools, the shape of parts)
Stock Range Ø 1.00 to 30.00mm round full bars (1.60mm in coil) in stock, other dimension available on request.
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
E-mail sales@aircraftmaterialsuk.com
Site © 2001 AirCraftMaterialsUK.com Ltd
Unit 7, Wycombe Industrial Mall, West End Street, High Wycombe, Bucks, HP11 2QY
Tel. 44 (0) 1494 857823
Tel. 44 (0) 8707 655 225/6 Fax. 44 (0) 8707 652 267/8