 |
|
 |
|
Part Number WS 1.4197 |
|
Hardenable alloyed free-cutting stainless steel for high precision parts, with a better corrosion resistance than AISI 420 F (1.4034 +S) |
||||||||
|
Chemical Composition Limits |
||||||||
| Weight % | C | Si | Mn | Cr | S | Mo | Ni | Fe |
| CHRONIFER LABOR M-PLUS | 0.20-0.25 | 0.60 max | 1.50 max | 12.50-14.00 | 0.15-0.25 | 0.75-1.25 | 1.00-1.20 | Rem |
|
Other Chemically similar Specifications |
||||||||
| Weight % | C | Si | Mn | Cr | S | Mo | Ni | Fe |
| WS 1.4197 | 0.20-0.25 | 0.60 max | 1.50 max | 12.50-14.00 | 0.15-0.25 | 0.75-1.25 | 1.00-1.20 | Rem |
| DIN X20CrNiMoS131 | 0.20-0.25 | 0.60 max | 1.50 max | 12.50-14.00 | 0.15-0.25 | 0.75-1.25 | 1.00-1.20 | Rem |
|
Chronifer Labor M-Plus material is Manufactured in Rod, Bar and coil WS 1.4197 Stainless Steel Hardenable alloyed free-cutting stainless steel for high precision parts, with a better corrosion resistance than AISI 420 F (1.4034 +S)
Material Properties This product is a compromise between good machinability (S-Content), high wear resistance (Cr-Ni-Mo content) and possibility for hardening (C-Content). Chronifer Labor M-Plus resists to corrosion after tempering and a forced polishing of the parts.
Availability Coil: Ø 0.50 - 3.00mm for Escomatic machines Bars: Ø 1-1.90mm cold drawn (ground on request) Ø 2-10.00mm ground and polished Standard bar length: 3m surface roughness Ra 0.4 (N5-N6)
Standard Tolerances Diameter: h8 (more accurate with short delivery on request) Length: +/- 30 mm Out of roundness/eccentricity: 1/2 of dia tol.
Heat Treatment Hardening: 1000-1050 ºC, slow furnace cooling (2-4 hours) Soft annealing: 750-850 ºC Max obtainable hardness 48-52 HRC
Cutting Rate 40-55m/min (approximate value, depending on the lubrication oil, the cutting tools, the shape of parts)
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
E-mail sales@aircraftmaterialsuk.com
Site © 2001 AirCraftMaterialsUK.com Ltd
Unit 7, Wycombe Industrial Mall, West End Street, High Wycombe, Bucks, HP11 2QY
Tel. 44 (0) 1494 857823
Tel. 44 (0) 8707 655 225/6 Fax. 44 (0) 8707 652 267/8