 |
|
 |
|
Part Number WS 1.4125 |
|
Hardenable Stainless Chromium Steel |
|||||||
|
Chemical Composition Limits |
|||||||
| Weight % | C | Cr | Mo | Si | Mn | S | Fe |
|
CHRONIFER M-17C |
0.95-1.20 | 16.00-18.00 | 0.80 Max | 1.00 Max | 1.00 Max | 0.015 Max | Rem |
|
Other Chemically similar Specifications |
|||||||
| Weight % | C | Cr | Mo | Si | Mn | S | Fe |
| WS 1.4125 | 0.95-1.20 | 16.00-18.00 | 0.80 Max | 1.00 Max | 1.00 Max | 0.015 Max | Rem |
| X 105 CrMo 17 | 0.95-1.20 | 16.00-18.00 | 0.80 Max | 1.00 Max | 1.00 Max | 0.015 Max | Rem |
| AISI 440C~ | 0.95-1.20 | 16.00-18.00 | 0.80 Max | 1.00 Max | 1.00 Max | 0.015 Max | Rem |
|
Chronifer M-17C material is Manufactured in Rod, Bar and coil AISI 440C ~ Stainless Steel
Material Features High carbon chromium steel designed to provide stainless properties with maximum hardness. After heat treatment type 440C attains the highest hardness of any stainless steel (about 60 HRC). This stainless steel principally has been used in bearing assemblies including bearing balls and races. In addition, it should be considered for cutlery, needle valves, ball check valves, etc.
Availability Coil: Cold drawn and polished: 10-35kg/coil Bars: Ø 0-1.99mm : Cold drawn and polished Bars Ø 2.00-16mm: Cold drawn, ground and polished.
Bars Length in 3m 92m) Surface roundness N5-N6
Standard Tolerances Diameter h8 (h7) Out of roundness/cylindricity: 1/2 of dia tolerance Tolerance in length :+/- 30mm
Tensile Strength Before heat treatment: depending on the diagram 750-950n/mm2
Heat Treatment Hardening: 1030-1070ºC Soft Annealing: 843-871ºC slow furnace cooling Max obtainable hardness 60 HRC
Cutting Rate 15-25 m/min (approximate value, depending on the lubrication oil, the cutting tools, the shape of parts)
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
E-mail sales@aircraftmaterialsuk.com
Site © 2001 AirCraftMaterialsUK.com Ltd
Unit 7, Wycombe Industrial Mall, West End Street, High Wycombe, Bucks, HP11 2QY
Tel. 44 (0) 1494 857823
Tel. 44 (0) 8707 655 225/6 Fax. 44 (0) 8707 652 267/8