AirCraftMaterialsUK.com
 

E-mail sales@aircraftmaterialsuk.com

Tel: + 44(0)1844 275560  Fax: 44(0)1844 346892 

     HOME    

USA Telephone Contact Number +1 714 735 4413

Office Open 8am to 6pm GMT
AirCraftMaterialsUK.com

 

Aluminium Alloys | Alloy and ST / Steel | Copper Alloys | Electronic Alloys  | Magnesium | Nickel Alloys | Plastic | Titanium Alloys 

Quality - BS EN 9120:2005, / ISO 9001:2008 

Request for Quotation

 

Data Sheet:

Alloy 625 / Inconel 625

Alloy 625 Basic Chemical Composition
Weight % Ni Cr Mo Nb+Ta Fe Ti C Mn Si S P Al
Alloy 625

58.0

min

20.0 / 23.0

8.0 / 10.0

 3.15 / 4.15 5.0 max 0.40 max 0.10 max

0.50 max

 0.50 max .015 max .015 max 0.40 max

  

Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium. The addition of molybdenum acts with the niobium to stiffen the alloy matrix, providing a high strength without a strengthening heat treatment. The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. Alloy 625 is used in chemical processing, aerospace and marine engineering oil & gas, pollution control equipment and nuclear reactors.

  

Availability

Alloy 625 (UNS N06625) is available in Round Bar, Flat Bar, Extruded section, Pipe, Tube, Plate, Sheet, Strip, Plate, Hexagon, Forging Stock, Extruded Section and Wire.  View Stock List, Plate Stock List or contact Sales for further availability.

  

Specifications

Bar ASTM B 446, ASME SB 466, AMS 5666, ISO 9723, VdTUV 499, BS 3076 NA21, EN 10095, DIN 17752, ASME Code Case 1935
Rod ASTM B 446, ASME SB 466, ISO 9723, VdTUV 499, BS 3076 NA21, EN 10095, DIN 17752, SME Code Case 1935
Wire AMS 5837, ISO 9724, DIN 17753
Forging Stock ASTM B 564, ASME SB 564, AMS 5666, ISO 9725, SME Code Case 1935, DIN 17754
Plate ASTM B 443, ASME SB 443, AMS 5599, AMS 5869, MAM 5599, ISO 6208, VdTUV 499,  BS 3072 NA21, EN 10095, DIN 17750, ASME Code Case 1935
Sheet ASTM B 443, ASME SB 443, AMS 5599, AMS 5869, MAM 5599, ISO 6208, VdTUV 499,  BS 3072 NA21, EN 10095, DIN 17750, ASME Code Case 1935
Strip ASTM B 443, ASME SB 443, AMS 5599, AMS 5869, MAM 5599, ISO 6208, VdTUV 499, EN 10095, DIN 17750,  ASME Code Case 1935
Pipe Seamless ASTM B444, ASTM B829, ASME SB 444, ASME SB 829,  BS3074 NA21
Pipe Welded ASTM B705, ASTM B775, ASME SB 705, ASME SB 775
Tube Seamless ASTM B444, ASTM B829, ASME SB 444, ASME SB 829,  AMS 5581, BS3074 NA21, 
Tube Welded ASTM B704, ASTM B751, ASME SB 704, ASME SB 704,  AMS 5581,   
Tube VdTUV 499, ISO 6207, DIN 17751, ASME Code Case 1935
Fittings ASTM B 366, ASME SB 366
Other UNS N06625, W. Nr 2.4856, ISO NW6625, NACE MR-01-75, INCONEL 625 (trademark)

   

Typical Mechanical Properties

Material

Ultimate Tensile Strength (psi)

0.2% Offset Yield Strength (psi)

Elongation in 50.8mm (%)

Hardness, Rockwell
Alloy 625 130,000 68,000 42 B65

Nominal Mechanical Properties in the annealed condition

 

For all stock availability contact Sales.

  

Disclaimer    

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

  

Sell your Surplus Stock Online at 4metal.co.uk

  

Sales Enquires : sales@aircraftmaterialsuk.com

Site © 2001 AirCraftMaterialsUK.com Ltd,Unit C5, Regent Park, Princes Estate, Princes Risborough, Buckinghamshire, HP27 9LE, UK

Tel: 44(0)1844 275560 Fax: 44(0)1844 346892 

Group companies Quantum Alloys Ltd