|
Request
for Quotation
RETURN TO WELDING HOME PAGE
|
Chemical Composition
|
Aluminum Welding Alloy 2319
|
| % |
Al |
Cu |
MN |
Zr |
Ti |
V |
Fe |
Si |
Zn |
Mg |
Be |
Others |
Others
|
|
Alloy
2319
|
Bal
|
5.8 - 6.8
|
0.20 - 0.40
|
0.10 - 0.25
|
0.10 - 0.20
|
0.05 - 0.15
|
0.03 max
|
0.20 max
|
0.10 max
|
0.02 max
|
0.0008 max
|
0.05 each max
|
0.15 max total
|
|
Used on |
2219, 201, 206, 224, 2014, 2036, 2693, (2319 USA), H15, L119.
Al-Cu casting alloys.
Not to be used for welding 5xxx series alloys.
|
|
Cross-Reference of Specifications |
MSRR 9500/45
AMS 4191D
Alloy 2319
UNS A 92319
AWS A5.10.92, ER 2319, R 2319
|
|
Availability
Ex stock MIG
spools and TIG rods
|
|
|
Weld Properties |
Melting range 1009°- 1189°F,
Density 2.77gm/cc
Hardness range 122 - 153 HV
ALLOY 2319 is a solid welding wire produced conventionally and then surface cleaned to remove standard metal working lubricants.
ALLOY 2319 is one of the few Al-Cu alloy filler metals available. This heat treatable alloy is used to fabricate Al-Cu casting alloys which are then subject to
PWHT.
|
Disclaimer
Every effort is made to ensure that
technical specifications are accurate. However, technical specifications
included herein should be used as a guideline only. All specifications are
subject to change without notice.
|
|
E-mail
sales@aircraftmaterialsuk.com
Site
© 2001 AirCraftMaterialsUK.com Ltd
Unit
7, Wycombe Industrial Mall, West End Street, High Wycombe, Bucks, HP11 2QY
Tel.
44 (0) 1494 857823
Tel.
44 (0) 8707 655 225/6 Fax. 44 (0) 8707 652 267/8
|
