|
Request
for Quotation
RETURN TO WELDING HOME PAGE
|
Chemical Composition
|
Aluminum Welding Alloy 5356
|
| % |
Al |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Other |
Others
|
|
Alloy
5356
|
Bal
|
0.25 max
|
0.40 max
|
0.10 max
|
0.05 - 0.20
|
4.5 - 5.5
|
0.05 - 0.20
|
0.10 max
|
0.06 - 0.20
|
0.05 ea max
|
0.15 max total
|
|
Used on |
5154, 5050, 5052, 5454, 525, 5005, 5086.
|
|
Cross-Reference of Specifications |
DRU 1374
UNS A95356
DTD 279
ER5356 (AWS A5.10.92)
R5356(AWS A5.10.92)
MSRR9500/38
(Replacement for 5056) (N6, NG6)
W N( 3.35566
DIN Al-Mg5
|
|
Availability
MIG
spools and TIG rods
|
Spools 0.5kg,
2.5kg and 15kg European manufacture
Spools 1 lb, 5
lb and 25 lb American manufacture
Rods 1 kg,
2.5kg, 5kg and 10kg packs European manufacture.
1000mm lengths,
Flag tagged for traceability
Rods 5 lb
American manufacture
Flag tagged for traceability |
|
Weld Properties |
Melting range 1060° - 1175°F,
Density 2.66gm/cc
ALLOY 5356 is an Al-Mg-Mn (Cr Ti) heat treatable alloy used for welding alloys of similar composition. 5356 is increasingly used in preference to type 5056, since it contains Ti for grain refining. (Note: 5056 tends only to be available for rivet stock).
|
Disclaimer
Every effort is made to ensure that
technical specifications are accurate. However, technical specifications
included herein should be used as a guideline only. All specifications are
subject to change without notice.
|
|
E-mail
sales@aircraftmaterialsuk.com
Site
© 2001 AirCraftMaterialsUK.com Ltd
Unit
7, Wycombe Industrial Mall, West End Street, High Wycombe, Bucks, HP11 2QY
Tel.
44 (0) 1494 857823
Tel.
44 (0) 8707 655 225/6 Fax. 44 (0) 8707 652 267/8
|
