AirCraftMaterialsUK.com
 

E-mail sales@aircraftmaterialsuk.com

Tel: + 44(0)1844 275560  Fax: 44(0)1844 346892 

     HOME    

USA Telephone Contact Number +1 714 735 4413

Office Open 8am to 6pm GMT

AirCraftMaterialsUK.com

 
Aluminium Alloys | Alloy and ST / Steel | Copper Alloys | Electronic Alloys  | Magnesium | Nickel Alloys | Plastic | Titanium Alloys 

Quality - BS EN 9120:2005, / ISO 9001:2008 

Request for Quotation

 

Data Sheet:

ER 410NiMo 

Alloy ER 410NiMo
Weight % C Mn Si Cr Ni S P Mo Cu

ER 410NiMo

0.06

max

0.6

max

0.5

max

 11.0- 12.5

4-5

0.03

max

0.03

max

0.4-0.7

0.75

max

   

Alloy ER 410NiMo is used primarily to weld cast and wrought material of similar chemical composition.  Preheating and interpass temperature of not less than 300ºF is required.  Post-weld treatment should not exceed 1150ºF, as higher temperatures may result in hardening.

   

AVAILABILITY

Alloy ER 410NiMo is a stainless steel TIG, MIG and SUB-ARC wire used for welding. For all stock availability contact Sales.

    

SPECIFICATIONS

AWS 5.9

ASME SFA 5.9

AWS ER410NiMo

UNS S41086

    

TYPICAL MECHANICAL PROPERTIES

Material Ultimate Tensile Strength (psi) 0.2% Offset Yield Strength (psi)

Elongation  (%)
ER 410NiMo 118,900 (820 MPa) 91,350 (630 MPa) 20

  

Disclaimer    

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

   

Sell your Surplus Stock Online at 4metal.co.uk

  

Sales Enquires : sales@aircraftmaterialsuk.com

Site © 2001 AirCraftMaterialsUK.com Ltd,Unit C5, Regent Park, Princes Estate, Princes Risborough, Buckinghamshire, HP27 9LE, UK

Tel: 44(0)1844 275560 Fax: 44(0)1844 346892 

Group companies Quantum Alloys Ltd